Resolving the Netgear Nighthawk mesh system not working issue is not rocket science, but, still, many users’ experience problems while trying to do so. Considering you are reading this blog post, we are assuming that you are a victim of the same issue. To help you troubleshoot it, we have penned down some solutions here. You will get familiar with them as you read further. Along with every solution, we have mentioned a precaution so that you do not get stuck with more technical issues on the way. Given this, you may keep reading.
[Fixed] Netgear Nighthawk Mesh System Not Working Issue
1. Try the Easiest Solution First
Start by implementing the easiest solution, i.e. restarting the Netgear Nighthawk mesh system. It has worked for many struggling with technical issues; it might help you out too. There is nothing wrong with hoping, isn’t it? Now, the question is, how can you restart the device? Well, to execute the process, you just need to press the power button located on the networking device OFF and ON without thinking much.
Make sure that after restating the mesh system, the power LED light on it turns green instead of flashing red or orange for that matter.
2. Call Up an Electrician at Home
The second factor that could have contributed to the Netgear Nighthawk mesh system not working issue is an improper power supply. Perhaps, the wall socket that was given the duty to provide electricity to your networking device is damaged thereby degrading the performance of the device along with itself. In this case, you should get in touch with an electrician as the wall socket needs to be repaired.
In case the electrician gives up trying to fix the damaged wall socket, then you can plug your mesh system into another wall socket present in your home.
3. Update the Extender Firmware
Are you still not able to make your Netgear Nighthawk system work? Well, in that case, you may update the extender to its latest version. You are free to use any method which you like for the execution of this process. The first method requires you to access the web user interface of your device whereas the second needs you to download the mobile application. Want to learn in detail how to execute the process? Refer to the user manual.
For your information, if the Netgear extender firmware update process fails for you, then you ought to update the firmware again till the process thoroughly gets completed.
4. See the Internet Connection
Sometimes, a weak Ethernet or internet connection can also cause the issue that you are experiencing at the moment. To prevent yourself from facing it anymore, you may get rid of an unstable connection. Wondering how? Well, it is quite simple. You just need to tighten the cable connection between the networking devices. Apart from this, ensure that the cable is not damaged, i.e. it should not have any cuts on it.
By any chance, if using a damage-free Ethernet cable proves to be fatal for you, then you are free to connect the networking devices wirelessly.
5. Reinstall the Netgear Extender
We suggest this solution to users when everything else refuses to work for them. It looks like you are in the same situation. To troubleshoot the issue at hand, you should reinstall the Netgear wireless range extender. To perform Netgear Nighthawk setup, you should press the WPS button on the extender first, and then the router. Ensure that you give enough time for the LED lights located on them to turn solid.
In case you are not comfortable using the WPS method, then you are free to use the Manual method or the Nighthawk app to configure the system.
As mentioned even at the beginning of this blog post, troubleshooting the Netgear Nighthawk mesh system not working issue has considered being a daunting task for various users out there. Given you are amongst them, we expect that with the aid of the hacks presented before you above, you will be able to make your networking device work within minutes. By any chance, if you are still not able to, then you may opt for a brand new model of Netgear Nighthawk mesh system.