Tired of facing Netgear extender orange light issue? Read the troubleshooting techniques mentioned in this post to get rid of it with ease.

Thorough Guide to Fix Netgear Extender Orange Light Issue

No matter how extraordinary a device is, it can fall victim to issues. And, Netgear WiFi extenders are no exception. Users at times face numerous issues with their Netgear extenders. However, the Netgear extender orange light issue is the most frequent problem that can ruin anyone’s internet usage experience.

Are you also struggling to resolve the orange light issue with your Netgear extender? If yes, then this post will act as a catalyst to your struggle and bear some positive results. Here, we have summed up a few troubleshooting techniques to get rid of the extender orange light issue. So, read on.

Fixed: Netgear Extender Orange Light Issue

I. Reboot the Netgear Extender

Before you do anything else, try to reboot your Netgear range extender. It will help in resolving all the minor technical glitches that are putting a chilling effect on the performance of your extender.

What happened? Have no idea of what rebooting is? FYI, rebooting is an act of giving rest to the Netgear extender by switching it off and turning it on back after some time. So, follow the same steps and check whether the Netgear extender orange light still exists. If yes, then hop up to the next troubleshooting technique.

II. Check the Power Supply

You might also see your Netgear extender flashing orange if it is not receiving a continuous power supply. Well, it can be a conclusion of either a defective wall outlet or a power outage. So, check the wall outlet first and if it turns out to be damaged, get it repaired. In case you are busy as a bee, use another wall outlet to power up the Netgear extender.

If everything is fine with the wall socket, then the power outage might be the culprit behind the Netgear extender orange light issue. In that scenario, using a UPS will be a great solution.

III. Update the Firmware

Did you ignore the pending firmware update of your Netgear extender? Probably yes. Know that an outdated firmware is one of the most prominent reasons dragging you to the Netgear extender orange light issue. So, without any delay, consider updating the firmware of your Netgear range extender.

You can update your Netgear WiFi extender using the Nighthawk app or the manual method. The choice is all yours. Get in touch with our professionals in case you need an expert’s guidance to update the firmware of your Netgear wireless extender.

IV. Check Extender-Router Connection

You might be unaware but a weak extender-router connection can also lead you to the Netgear extender orange light issue. The connection between your WiFi devices can be strengthened depending on the source used.

If the extender-router connection is established using a wireless source, then mind the distance between both devices. It should be safe (neither too less nor too much). On the other hand, if an Ethernet cable has been used to connect your WiFi devices, check for cuts on it. In case you find any, replace it with a new Ethernet cable. And yes, do not forget to make the connection firm.

V. Remove WiFi Interference

Have you heard of WiFi-interference? No? Well, WiFi interference in nothing but any hindrance in the path of the WiFi signals and can also result in the Netgear extender orange light issue. Some of the factors contributing to WiFi interference are mirrors, fish tanks, metal objects, thick concrete walls, tracking devices, etc.

Apart from this, appliances like microwave ovens, cellular phones, smart cameras, Bluetooth gadgets, refrigerators, etc. are also responsible for causing WiFi interference. Therefore, move your Netgear extender away from such things and see whether it is still flashing orange.

VI. Reset the Extender

Reading this point means that the Netgear extender orange light issue is still troubling you. Resetting the extender will resolve all the issues that it is dealing with. However, it will delete all the customized settings from your Netgear range extender.

You can reset your Netgear extender by long-pressing the Reset button. As soon as the extender gets restored to the factory default mode, do Netgear WiFi extender setup from scratch.

The Conclusion

Facing the Netgear extender orange light issue is common these days. However, what’s uncommon is resolving it. We hope that you will be able to do that uncommon task with the help of the troubleshooting tips discussed in this post. In case your Netgear extender is still flashing orange, get in touch with our profound experts for immediate help.

Disclaimer: readynas.cc is a website providing technical resolution and information on various issues and providing online support services for networking gadgets. Use of any images, logo, brand or product names on our site is just for informational and referential purpose. Technical help & services are provided on customer request.