“Since Netgear boasts about its amazing product line, I installed a Netgear N300 WNR2000V3 WiFi router in my house. It worked perfectly when the Netgear Nighthawk setup was newly performed. But, recently it started showing its true colors. When I turned it on, its power light stayed amber. If I talk about other LEDs, they were also in a similar situation. The only difference was that they blinked for a second and the router turned off. Although it powered up automatically, the situation is still the same. Numerous reboot loops have been executed. Also, when I connect my computer and router via Ethernet, lights goes off. What could be potentially wrong?”
The stories and faces might change but the main thing is that like this particular user, thousands are facing similar kinds of issues while using their routers. Keeping all of them in mind, we have penned down this write up. Keep reading.
Netgear WNR2000V3 Won’t Turn On [Reasons]
If the Netgear router won’t turn on or doesn’t stay powered up for longer, then its major reason is the socket being utilized for the power supply job. There is a high possibility that the socket from which the N300 WNR2000V3 router is fetching the power is damaged or short-circuited due to which its power requirements are not getting fulfilled.
The only effort of plugging the Nighthawk router into a working socket is required. But, you also have to ensure that the router’s power pins perfectly fits into the socket. Otherwise, power fluctuations will keep troubling you.
Note: It is not always the socket that results in an improper power supply. Multiple occasions have been observed where the power cable of the router is damaged and the router does not turn on properly. Thus, make sure that you are using a non-damaged power cable. And most importantly, it should be brought in by the manufacturer i.e. Netgear.
Solutions: Netgear WNR2000V3 Won’t Turn On
The previous section made you aware of only one reason that might cause the problem you are facing. But, multiple reasons work together to create such a big problem. To know about them and their relevant solutions, refer to the below-given sections.
1. Perform a Power Cycle
If the routerlogin.net address is not working for you, power cycle the router. If the router is not working properly or not giving desired outcomes, reboot it. From these two situations, it is very clear that rebooting has a potential to help you address the problem you are facing. Therefore, you should first of all try your hands on this very easiest technique. Simply, press the router’s Power button and remove the power cable. Wait for a decent amount of time and do the exact opposite of what you did before waiting. Very soon you will find that the router has power up properly and is ready to facilitate you with a stable WiFi connection. In case, luck does not favor you, consider moving to the next tip.
2. Update the WNR2000V3 Router
Open the Nighthawk app on your mobile phone and equip your Netgear Nighthawk N300 WNR2000V3 with the latest firmware version. You can also choose the path of accessing the web-based management panel for the same. But, the most important thing you need to keep in mind is that the firmware update process of the router needs to be completed without interruption. If you keep playing games on your device or disconnect it from the router during the process, no firmware will be updated. Instead, you might fall victim to firmware-related issues with the WiFi router. Another thing you should know is that the router will reboot after the firmware update. Thus, be patient.
Quick Tip: If you have employed a network switch to power up the Netgear router, then we suggest you check for its non-damaged status. Apart from this, the LAN cable connecting both devices must be intact. Otherwise, you will get fluctuated power supply in addition to a weak internet connection.
The Final Thoughts
That’s all you can do if the Netgear WNR2000V3 router N300 won’t power on. It is expected that the issue will get resolved after the implementation of the aforementioned techniques. Just in case nothing works out, you should not waste to opt for a factory default reset of the router. For this, find and press the Reset button using a sharp object. Set it up again after that to reuse its WiFi services.