Netgear users often opt for updating the firmware of their WiFi devices in an attempt to take their devices’ performance to the next level. But, what if the firmware update itself becomes a mess for you? It has been found that many people face Netgear WiFi not working issue after updating the firmware of their device. If you are also struggling with the same, then worry not! We’ve got your back! Below we’ve outlined various troubleshooting tips on how to fix the problem of Netgear WiFi not working after firmware update. Stick to reading!
Fixed: Netgear WiFi Not Working After Firmware Update
Right from a wrong firmware update to connectivity issues, there could be various reasons shoving you to experience Netgear WiFi not working problem after updating the firmware of your device. Well, no need to sweat over it! Walk through the troubleshooting tips given in the blog and make your device up and running in a jiffy.
- Reboot Your WiFi Network
Whether you are facing a problem with your Netgear router or Netgear WiFi extender setup, the trick works well in most cases. For executing it, all you need to do is, disconnect your Netgear device from all other devices, turn it off, and unplug it for some time. Once you feel that you have given enough time to your Netgear device for reviving its performance, connect it back to its power socket, turn it on, and see if it works for you or not.
- Check Internet Access
Make sure your Netgear device is having access to a high-speed internet. For this, you can run a ping test on your device. If you find that your device is not receiving sufficient internet access, contact your Internet Service Provider to have a workaround of the problem. Also, check your data cap and ensure your data is not at its edge.
- Verify Cable Connections
Netgear WiFi not working after firmware update issue can also occur if the cables connected to your devices are loose or damaged. To get that fixed, check all the cable connections between your devices and if any problem is found with their connectivity, you better know what to do. You can also temporarily connect your devices wirelessly to see if the problem fixes for you.
- Check the Firmware Version
Chances are you have not updated the correct firmware version on your Netgear WiFi device. It is always recommended to update the firmware of a router/extender as per its model number. But, in case you have mistakenly updated the firmware version of another model on your device, your device will not be working. In that case, you need to reset your Netgear WiFi device to the default settings and configure it again.
Update the Firmware Again
Your Netgear WiFi may not be working if a corrupted firmware version has been updated on your device. To get rid of the issue, you need to again update the firmware on your device. For this, access routerlogin.net setup wizard (for the router) or mywifiext.net setup wizard (for the extender) and update the firmware of your device as per its model number.
Caution: Bear in mind not to interrupt the firmware update process by doing any additional activity on your device.
Firmware updates are introduced to fix certain bugs and improve the overall performance of a WiFi device. But, at times, users face Netgear WiFi not working problem after updating their device with the new firmware version. Although we have given the solution to the problem in the steps jotted down above, just in case you are still encountering the same problem, contact our experts and let them handle the situation for you. For this, simply give them remote access to your device! They will then diagnose and fix the Netgear WiFi not working issue for you so that you can get the most out of your device.