Learning how to log in to a Netgear WiFi router is pretty straightforward, but it is possible to run into login issues. Many users get frustrated when they come across the Netgear router password not working issue. If you are also standing in the queue, then it might be because of various reasons: mistyped password, a weak internet connection, enabled Smart Connect, a brief power outage, outdated or corrupted firmware, etc.
Regardless of what might be the reason behind the Netgear Nighthawk router not working issue, the steps mentioned in this post will help you troubleshoot it. So, before you start pulling your hair out because of the frustration, read on.
Solved: Netgear Router Password Not Working
Type the Correct Password
Before you get down to any other troubleshooting step, check the password that you have typed. Many users forget to cross-check the router password after typing it. Chances are that you are making the same mistake.
To rectify it, make sure that the password you’ve used is correct. In case you are not sure regarding the WiFi password of your Netgear Nighthawk router, then refer to the user manual. You’ll find every little detail regarding your device in there.
Now, access the Netgear Nighthawk router login page and check whether you are still facing the Netgear router password not working issue. If you are, then keep reading.
Check the Internet Connection
We all know how a weak or no internet connection can make us fall into a pit of technical issues. Who knows you might be facing the Netgear router password not working issue because of a poor internet connection?
Well, worry not! To get rid of the issue, get in touch with your Internet Service Provider. If everything is fine from his side, then check the connection between your Netgear Nighthawk router and the existing modem. If your devices are connected wirelessly, change that now! Instead, make use of an Ethernet cable to ensure a strong connection between your devices.
Note: Make sure that the Ethernet cable you use is not worn out or damaged from anywhere.
Perform Router Firmware Update
Netgear router password not working is not the only issue that an outdated firmware can cause. You can also come across issues like routerlogin not working, can’t change the default password, etc if the firmware of your Nighthawk device is outdated.
Thus, update the firmware of your Netgear Nighthawk router to the latest version right away! Not sure about how to do that? No problem! You can get in touch with our technical experts for the step-by-step guidelines to update the firmware of your device.
Reset the Netgear Router
If you are still struggling with the Netgear router password not working issue, then we highly recommend you perform default factory reset. Restoring your Nighthawk device to the factory default settings is quite easy. All you need to do is, follow the guidelines mentioned below:
- Look for the Reset button located on your wireless router.
- Once found, take a pin-pointed object and carefully press the button with its help.
- Give your home router some time to get restored to the default settings.
The minute you are finished resetting your Nighthawk router, perform routerlogin.net setup from scratch.
The Bottom Line
As mentioned above, there can be several reasons why you’re experiencing the Netgear router password not working issue. But, if you carefully follow the troubleshooting tips mentioned in this post, you’ll surely be able to fix it. On the off chance, you get stuck at any point, our technical experts aren’t that far to reach!