Netgear Nighthawk M6 Pro Router

Netgear Nighthawk M6 Pro Router Setup [Easy Steps]

Out of miraculous networking devices manufactured by Netgear, an M6 Pro 5G WiFi 6E mobile hotspot router is known for providing the user with unparalleled internet speeds. The Netgear Nighthawk M6 Pro router is powered by a Qualcomm Snapdragon X65 5G modem-RF system. It supports 2.4GHz, 5GHz, and 6GHz bands due to which one can access WiFi on up to 32 devices at the same time.

This guide talks about the hardware installation of the Nighthawk M6 Pro WiFi router and its connection with the internet. So, stick to reading and learn how you can get your device up and running in a matter of minutes.

What’s in the Box?

Nighthawk M6 Pro with pre-installed SIM card

Battery cover

Battery

USB type C cable

AC adapter

Your Nighthawk M6 router has a touch screen, 2 antenna ports, an Ethernet port, and a USB type C port. It also has a Power button to turn it ON and OFF.

Before You Set Up Nighthawk M6 Pro

You need to install the battery of the pro router before you set it up. Therefore, insert the battery and install the back cover. There, you will also be able to see a pre-installed SIM card. If you want to charge the battery, you need to connect the USB cable to the router’s USB port and the AC adapter. Once done, plug the adapter into a working outlet and switch on the Power button.

How to Set Up Netgear Nighthawk M6 Mobile Hotspot?

The LCD screen of the mobile hotspot router can be used for changing the settings. These settings include the WiFi password, login password, and the standby time. Once done, you need to follow the steps highlighted below:

  • Press the Power button on your mobile hotspot and keep it pressed for 2 seconds.
  • You will be asked to set up the login password and username of the router.
  • Now, follow the on-screen instructions and customize your mobile hotspot settings.

Once you’re done setting up the router, you will see the Netgear Nighthawk M6 Pro Home screen. The screen will display the mobile hotspot’s SSID and password. Along with this, you will see the signal strength of the AT&T wireless network and connection type. The screen also has a QR code that can be scanned to connect to the mobile hotspot network. However, to make use of the hotspot after the Netgear Nighthawk router setup, you need to connect to it. The upcoming information will help you know how you can complete this process.

You can rely on the battery power in case you don’t have access to a power socket or are away from the home or office. The Power Manager will allow you to optimize battery life. The mobile hotspot is also manageable without a battery. Therefore, you can remove it and plug your Netgear Nighthawk Pro M6 router into the power outlet. To know more, you can refer to the user manual of the product.

The screen on your mobile hotspot goes dark to save some power. So, you need to press and release the Power button quickly to wake the screen.

How to Connect to Nighthawk M6 Pro?

Two methods can be used to connect to the mobile hotspot router. The first one uses the QR code whereas the second one can be used on a device that cannot scan codes.

1. QR Code Connect via Smartphone

Tap the QR code icon on the LCD screen of your M6 mobile hotspot. You will see a QR code. Now, point your mobile phone’s camera at the QR code and wait for the connection. Enjoy using the internet!

2. Connection on Laptop or Other Device

Open the WiFi Connection manager on your laptop and find the network name of your mobile hotspot. Generally, it is ATT-WIFI-XXXX. Connect to the network by entering the WiFi password of your Pro hotspot router. The connection is successful.

Once you connect to the WiFi network of your mobile hotspot router, you can log in to it manage your mobile hotspot network and change its settings. The next section will reveal how.

How to Log in to Netgear Nighthawk M6 Pro?

A web browser can be used to view the information of your mobile hotspot and messages. Changes can also be made to your device. Here’s how you can log in to the Nighthawk M6 pro device to change its settings:

  • On a WiFi-enabled device that is connected to the network of your router, visit http://attwifimanager.
  • You can also use http://192.168.1.1 for the same.
  • Log in to the mobile hotspot panel using the admin password. The default password value is attadmin.

Verdict

That’s all about the Netgear Nighthawk M6 Pro mobile hotspot. We hope that you will be able to make it functional with the help of the information given above. Now, you can start using the internet the way you fancy.

Disclaimer: readynas.cc is a website providing resolution and information on various issues related to networking gadgets. Use of any images, logo, brand or product names on our site is just for informational and referential purpose. Users are required to take the help of the information provided here at their own discretion.