How to Use WPS Button on Netgear Router for Setup?

Netgear router upon purchase needs to be installed with the home network to begin accessing its WiFi on various client devices in the home. The setup process is fairly simple and easy. You can use the WPS button on Netgear router to get the task done. You can also put to use the Nighthawk router app and login URL on the web management utility on a browser for this job. We have penned down this post for users who seek to use the WPS button to set up the router.

Where is WPS Button on Netgear Router?

We will first help you locate the WPS button on your router. The position of the button may vary for different models of Netgear routers. On a Netgear router, in general, the WPS button is located on the backside panel. However, some router models also have this button located on the side.

What is WPS?

WPS stands for Wireless Protected Setup. This is considered to be the easiest and simplest method for Netgear router setup. In this method, you make the connection between the devices without having to use the login password.

The main requirement for using this method of setup is that the networking device that you are trying to set up should have the WPS button on it. The same is the case with the main gateway. In case your Netgear router or the modem does not have the WPS button on it, then you need to use an alternative method to get the task done.

If you do not have a PC or are facing routerlogin not working issue, then use the Nighthawk app to set up your router.

Steps to Use WPS Button on Netgear Router for Setup

Let us now tell you now how to use the WPS button on Netgear router to accomplish the setup task. We recommend you execute them properly. Although this is the simplest method, however, many users get stuck and can not get through the process easily. So execute steps carefully.

1st Step: Unwrap the Package

We assume this is a brand-new Netgear router. So initiate the process by unboxing the Netgear router. Be very careful in handling the fragile parts in the package. Also, verify if you have received everything in good condition.

2nd Step: Place the Router

The next step is to place your Netgear router at an appropriate place in the home. For now, i.e. during the setup process, an ideal place will be near the modem. Since you need to make the connection between the router and the modem, this is an essential step. Therefore, place the router in the same room where the modem has been placed.

3rd Step: Supply Power

There ought to be an available power socket nearby so that you can supply power to the Netgear router. In case there is no power outlet available near the modem, then consider using an extension cord. Connect the power adapter that came along with the router into it. Plug the other end into the power socket. Finally, turn on the router with the power button.

4th Step: Complete the Setup Process

You have reached the final step to complete the setup process of your Netgear router. You now need to gently press the WPS button on Netgear router. After that, press the WPS button on the modem in the same way.

That’s it! You have completed the setup process. You can start enjoying the Netgear router WiFi on various devices in your home.

Let’s Conclude It

Here comes an end to our informative post on how to use the WPS button on Netgear router to set it up in your home. Once the setup is done, you can move the Netgear router to a new location in the home. Consider placing it closer to the modem since it has to receive signals from it.