How to Connect Netgear Router to Xfinity Modem

How to Connect Netgear Router to Xfinity Modem [Easy Guide]

Have you recently replaced your existing modem with one brought in by Xfinity? It only means that you have to set up your Netgear router once again with the Xfinity modem. If you are not aware of the steps involved in the setup process, then you can rely on the guide to get things done. This blog will explain in detail how to connect Netgear router to Xfinity modem. Read on.

Before Connecting Netgear Router to Xfinity Modem

The connection process will become much easier for you if you make yourself familiar with prerequisites. Here are a few steps to be taken before starting the actual process of connecting your devices:

  • Restore Your Router to Default Settings: As your router was set to work with another modem, resetting it is recommended. You can perform a factory default reset of the router by pressing and holding the Reset button for 7-10 seconds. After that, you can proceed with the routerlogin.net setup process.
  • Arrange a Pair of Ethernet Cables: The next thing you need to do is arrange a pair of Ethernet cables. The first cable will help you initialize the connection process between your Netgear router and Xfinity modem whereas second one will help you take the final steps of the process.

Apart from doing the aforementioned things, you are also required to learn about the default username and password of your router. The username is admin and the password is password. Also, you have to turn off the router as well as the modem before starting the process. The reason being, there is a particular sequence to power them up for the setup process.

How to Connect Netgear Router to Xfinity Modem?

This section will particularly describe what you have come here for i.e. how to connect Netgear router to Xfinity modem. Now that all your devices are off, you are suggested to give a shot at the below-mentioned instructions to complete the setup process:

netgear router setup

  • Using an Ethernet cable, join the LAN1 port of your Xfinity modem to the Netgear router.
  • You should connect the cable to the Internet port (the one in yellow) of the router.
  • After that, join the computer and your Netgear WiFi device using the second cable.
  • Switch on your devices now – 1st Xfinity modem, 2nd Netgear router, and 3rd computer.
  • Open an upgraded internet browser on your PC now.
  • Input the router’s default URL i.e. routerlogin.net into the address field and hit Enter.
  • You router will now check if there’s another access point or router present in the home network.
  • The internet connection will also be detected at the same time.
  • Now, choose the option saying that you want to configure your Netgear router manually.
  • Select the operating mode and set the admin password for your router.
  • You also have to answer a few security questions.
  • After that, you are suggested to skip the firmware update part. You can do it later.
  • Assign some internet settings and follow the on-screen prompts.
  • You have to register your product now.
  • Very soon, the Netgear router setup wizard will appear displaying the final settings.
  • The router is successfully connected to the Xfinity modem.

Have you understood how to connect Netgear router to Xfinity modem? You can also use the Nighthawk application to get this task completed. But, the aforementioned instructions must be opted for if you get the Nighthawk app not working error during the setup via mobile phone. And yes, do not forget to update the firmware of your router after the setup process.

To Sum Up

Connecting the Netgear router to an Xfinity modem is all about providing a new beginning to the internet experience. We have discussed all the important steps involved in the setup process here. Now, all we are assuming is that you have successfully learned how to connect Netgear router to Xfinity modem and have completed the process.

To make the most of your home network, it is suggested that you enable Parental controls, upgrade the firmware, change the network key and SSID of your router. The last task you are left with is to join the router’s WiFi network on your client devices and enjoy accessing the internet connection.

Disclaimer: readynas.cc is a website providing resolution and information on various issues related to networking gadgets. Use of any images, logo, brand or product names on our site is just for informational and referential purpose. Users are required to take the help of the information provided here at their own discretion.